The default RTcmix application (invoked by the CMIX command) uses the included scorefile language Minc. However, if you configure the build of RTcmix for Perl support using the –with-perl flag (see the installation guide for information about this), then compiling RTcmix will make a Perl-enabled command (PCMIX) that has a Perl parser as the ‘front-end’ instead of Minc.
To use Perl with RTcmix, write a Perl script with the following statement at the top:
use RT;
Then use any Perl statements and any of the function calls you would use in an RTcmix Minc script. Run the script with the command PCMIX (instead of CMIX).
Now, whenever a PCMIX script uses a function name unknown to Perl, Perl will pass the function and its arguments to RTcmix. If it’s unknown to RTcmix, then RTcmix will give its usual error message about it and continue processing the script.
This means that any RTcmix functions loaded into a script (with the load command) will work, even if these belong to an instrument not part of the distribution source tree. Some Minc functions have the same names as internal Perl functions. In general, Perl versions take precedence over RTcmix versions, with the following exceptions:
srand()
rand()
reset()
If your script uses these names, you’ll get the RTcmix versions. If you want to use the Perl versions, you must use the CORE:: prefix, like this:
CORE::srand(4);
$foo = CORE::rand(99);
If you want to use the other RTcmix functions whose names collide with Perl ones, then you must use the RT:: prefix., like this:
RT::print($foo);
The only such functions that you could possibly care about are print, splice and open. But who wouldn’t want to use the Perl print instead of the RTcmix one?
A simple WAVETABLE Perl script:
use RT;
print "\nWelcome to the Perl front end to RTcmix!\n\n";
rtsetparams(44100, 1);
load("WAVETABLE");
setline(0,0, 1,1, 4,1, 5,0);
makegen(2, 10, 1000, 1, 0.3, 0.2);
$start = 0;
$dur = 0.7;
$amp = 15000;
$freq = 7.00;
for ($i = 0; $i < 5; $i++) {
WAVETABLE($start, $dur, $amp, $freq);
$start += 0.5;
$amp -= 2000;
$freq += 0.07;
}
Another WAVETABLE Perl script:
# This is a translation of sample_scos_1.0/WAVETABLE3.sco into Perl. -JGG
use RT;
rtsetparams(44100, 2);
load("WAVETABLE");
print_off();
makegen(1, 24, 1000, 0, 1, 950, 0);
makegen(2, 10, 1000, 1, 0.3, 0.2);
srand(0.35);
for ($start = 0; $start < 7; $start += 0.14) {
$freq = (random() * 200) + 35;
for ($i = 0; $i < 3; $i += 1) {
WAVETABLE($start, 0.4, 1500, $freq, 0);
WAVETABLE($start + random()*0.1, 0.4, 1500, $freq + (random()*7), 1);
if ($start > 3.5) {
makegen(2, 10, 1000, 1, random(), random(), random(), random(),
random(), random(), random(), random(), random(), random(),
random());
}
$freq += 125;
}
}
Perl script showing the RTcmix ability to chain several instruments together:
# Quick translation of sample_scos_3.0/LONGCHAIN_1.sco to Perl, for testing.
# This score makes a wavetable synth riff and feeds it through 3 effects
# in series: flange -> delay -> reverb
use RT;
print_off();
rtsetparams(44100, 2);
load("WAVETABLE");
load("FLANGE");
load("JDELAY");
load("REVERBIT");
bus_config("WAVETABLE", "aux 0-1 out");
bus_config("FLANGE", "aux 0-1 in", "aux 10-11 out");
bus_config("JDELAY", "aux 10-11 in", "aux 4-5 out");
bus_config("REVERBIT", "aux 4-5 in", "out 0-1");
$totdur = 30;
$masteramp = 1.0;
$atk = 2; $dcy = 4;
$numnotes = makegen(3, 2, 99,
5.00, 5.001, 5.02, 5.03, 5.05, 5.07, 5.069, 5.10, 6.00);
$transposition = 2.00; # try 7.00 also, for some cool aliasing...
srand(2);
# ---------------------------------------------------------------- synth ---
$notedur = .10;
$incr = $notedur + .015;
$maxampdb = 92;
$minampdb = 75;
$ampdiff = $maxampdb - $minampdb;
control_rate(20000); # need high control rate for short synth notes
setline(0,0, 1,1, 20,0);
makegen(2, 10, 10000, 1, .9, .7, .5, .3, .2, .1, .05, .02);
for ($st = 0; $st < $totdur; $st += $incr) {
$slot = random() * $numnotes;
$pitch = pchoct(octpch(sampfunc(3, $slot)) + octpch($transposition));
$amp = ampdb($minampdb + ($ampdiff * random()));
WAVETABLE($st, $notedur, $amp, $pitch, $pctleft=random());
}
# for the rest
control_rate(500);
$amp = $masteramp;
# --------------------------------------------------------------- flange ---
$resonance = 0.3;
$lowpitch = 5.00;
$moddepth = 90;
$modspeed = 0.08;
$wetdrymix = 0.5;
$flangetype = 0;
$gensize = 100000;
makegen(2,10,$gensize, 1);
$maxdelay = 1.0 / cpspch($lowpitch);
setline(0,1,1,1);
FLANGE($st=0, $insk=0, $totdur, $amp, $resonance, $maxdelay, $moddepth,
$modspeed, $wetdrymix, $flangetype, $inchan=0, $pctleft=1);
$lowpitch += .07;
$maxdelay = 1.0 / cpspch($lowpitch);
makegen(2,9,$gensize, 1,1,-180);
FLANGE($st=0, $insk=0, $totdur, $amp, $resonance, $maxdelay, $moddepth,
$modspeed, $wetdrymix, $flangetype, $inchan=1, $pctleft=0);
# ---------------------------------------------------------------- delay ---
$deltime = $notedur * 2.2;
$regen = 0.70;
$wetdry = 0.12;
$cutoff = 0;
$ringdur = 2.0;
setline(0,0, $atk,1, $totdur-$dcy,1, $totdur,0);
JDELAY($st=0, $insk=0, $totdur, $amp, $deltime, $regen, $ringdur, $cutoff,
$wetdry, $inchan=0, $pctleft=1);
JDELAY($st=0.02, $insk=0, $totdur, $amp, $deltime, $regen, $ringdur, $cutoff,
$wetdry, $inchan=1, $pctleft=0);
# --------------------------------------------------------------- reverb ---
$revtime = 1.0;
$revpct = .3;
$rtchandel = .05;
$cf = 0;
setline(0,1, 1,1);
REVERBIT($st=0, $insk=0, $totdur+$ringdur, $amp, $revtime, $revpct,
$rtchandel, $cf);
# john gibson, 17-june-00
FInally, a Perl script invoking a number of simultaneous notes:
# Illustrates using a function to play one note consisting of
# multiple RTcmix notes.
use RT;
rtsetparams(44100, 2);
load("WAVETABLE");
# Set to 1 to write a sound file (if processor too slow for rt playback).
$writeit = 0;
if ($writeit) {
set_option("audio_off", "clobber_on");
rtoutput("/tmp/bell.aiff");
}
# just a sine wave (try extra harmonics for more complex bell sound)
makegen(2, 10, 5000, 1);
# exponential amplitude envelope
makegen(1, 5, 1000, 1, 1000, .0005);
# individual bell notes
# start dur amp freq
bell(0, 5.0, 4000, 1000);
bell(3, 8.0, 5000, 1200);
bell(6, 12.0, 3000, 800);
# bell notes in a loop (needs fast processor for real time playback)
$incr = 0.1;
for ($st = 10; $st < 20; $st += $incr) {
$freq = (random() * 1000) + 400;
bell($st, 8, 2000, $freq);
$incr += 0.2;
}
# Play one bell note. Parameters are start time, duration, amplitude,
# and fundamental frequency. (Based on description of Risset's bell
# instrument in the Dodge book.)
sub bell () {
my($start, $dur, $amp, $freq) = @_;
my $pan;
print "fundamental frequency: $freq\n";
WAVETABLE($start, $dur, $amp, $freq * .56, $pan=1);
WAVETABLE($start, $dur * .9, $amp * .67, $freq * .56 + 1, $pan=0);
WAVETABLE($start, $dur * .65, $amp, $freq * .92, $pan=.9);
WAVETABLE($start, $dur * .55, $amp * 1.8, $freq * .92 + 1.7, $pan=.1);
WAVETABLE($start, $dur * .325, $amp * 2.67, $freq * 1.19, $pan=.8);
WAVETABLE($start, $dur * .35, $amp * 1.67, $freq * 1.7, $pan=.2);
WAVETABLE($start, $dur * .25, $amp * 1.46, $freq * 2, $pan=.7);
WAVETABLE($start, $dur * .2, $amp * 1.33, $freq * 2.74, $pan=.3);
WAVETABLE($start, $dur * .15, $amp * 1.33, $freq * 3, $pan=.6);
WAVETABLE($start, $dur * .1, $amp, $freq * 3.76, $pan=.4);
WAVETABLE($start, $dur * .075, $amp * 1.33, $freq * 4.07, $pan=.5);
}
# [scorefile by John Gibson]